> ## Documentation Index
> Fetch the complete documentation index at: https://support.dripos.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Register Stand Setup

> Assemble your register stand and tablet

## Required Hardware

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-required.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=6bb81f4aad55f1da6140b7a9ded0803c)

> [card] Charging Cable

**1. Unscrew Security Bracket**

Locate the Touch holder and unscrew the security screw to remove the top bracket that holds the adhesive.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-new1.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=68b6823325fa09d4f6579b2cce5ec830)

**2. Attach Touch Holder**

Attach the Touch holder to the stand and screw in the 4 screws to secure.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-new1.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=68b6823325fa09d4f6579b2cce5ec830)

**3. Peel Adhesive Paper**

Peel off the adhesive paper from the top bracket.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-new3.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=dbbee5aa04dc069253bc35504d6f721c)

**4. Center Bracket**

Place the bracket in the center of the tablet and press down and hold for 20 seconds.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-new4.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=568bcfe4c41c87ca5a399b0757c19950)

**5. Place Charging Cable**

Feed the charging cable through the middle of the stand and pull out from the bottom.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-newcable.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=1d6916e91f73f0e5b1242f16d779fc2a)

**6. Attach Top Bracket**

Attach the top bracket (with your tablet attached) to the stand. Ensure charging cable runs through the cable channel.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-new5.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=7627ec3b20a9ac6bb08f7f6eadb3f009)

**7. Screw In Security Screw**

Screw in the security screw with the provided security key and plug in charging cable.

![](https://mintcdn.com/frostbytetechnologiesinc/wbv1h8zoRW7sYW7K/hardware/hardware-images/registerstand-new6.png?fit=max\&auto=format\&n=wbv1h8zoRW7sYW7K\&q=85\&s=11888a72fc89427b2b38242a19b6686a)

> [!TIP]
>
> Download the Dripos POS App for iPads  [here](https://apps.apple.com/us/app/dripos-point-of-sale/id1545180462) \
> \
> Download the Dripos POS App for Android devices [here](https://play.google.com/store/apps/details?id=com.corkdrinks.drippos\&hl=en_US)

> [accordion] Legacy Register Setup Instructions
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step1-unbox.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=c06b650aed7b29c3b0a18a3a4aa664d7)
>
> > [card] Register Stand
>
> > [card] Register Stand Keys
>
> > [card] Register Stand Cushion Inserts
>
> > [card] Right Angle USB-C Charging Cable
>
> > [card] iPad
> >
> > **Register Stand Compatible Models**: iPad 10.9” 10th Gen, iPad 11” 11th Gen, iPad Pro 11", iPad Air 11"
>
> **1. Unlock Stand**
>
> Insert and turn the register stand key 90 degrees counterclockwise to unlock the stand. Slide the latch from left to right to detach the cover piece and set aside.
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step2-unlock.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=f1e402dfc962e25d0809389ed9d51e23)
>
> **2. Insert Stand Cushions**
>
> For 10.9" 10th Gen iPads, insert the register stand cushion inserts at each corner.
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step3-precushion.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=adc1c8a41d0616a8dc18d703f5506dd2)
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step4-cushioninsert.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=27f39f3fe6ee2f81aab7ede5069117c6)
>
> **3. Insert Charging Cable**
>
> Insert the right angle USB-C charging cable through the middle of the stand. Feed the cord through the bottom of the stand.
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step5-insertcable.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=5c0a62baf6a75accfdec1a6281d1fe2c)
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step6-insertcable.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=403b8619f8933ac528c2e0c196560218)
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step7-insertcable.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=2e156a341ff4e63624f20f9cca72f851)
>
> **4. Align iPad Camera**
>
> Plug the USB-C charging cable into the iPad. Place the iPad inside the register stand and ensure the camera is lined up correctly with the register stand opening at the top left corner.
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step8-putipad.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=0b80f21f53289c50a97140f8ac5ff6a1)
>
> **5. Secure Register Cover**
>
> Place the register stand cover over the iPad. Confirm the cover is securely in place before inserting the register stand key and turning 90 degrees clockwise to lock into place.
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step9-closecover.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=6cec192c04ea6a96cf02ece58f1eda7b)
>
> ![](https://mintcdn.com/frostbytetechnologiesinc/0dDgg67YZXRZlBfy/imgs/hardware/oldbosstab/step10-lockstand.png?fit=max\&auto=format\&n=0dDgg67YZXRZlBfy\&q=85\&s=a19e5c8b2f38823cb1adcd7fb3f0e7f2)
>
> **6. Plug In Charging Cable**
>
> Plug the other end of the charging cable into a power outlet to ensure the iPad is charged at all times.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.